Performance Max Alcalino

High-performance foaming alkaline detergent also suitable for touchless systems Performance Max Alkaline from the X Line is a new-generation, highly concentrated, scented alkaline detergent, developed for professional washing in automatic and touchless car washes, self-service tracks and high-pressure manual systems. The main features: The formulation, containing selected surfactants, provides a solvent and anti-corrosive effect, removing road film, atmospheric dirt, grease, oil, insects and organic residues, thereby helping to preserve surfaces. When used in combination with PERFORMANCE MAX ACID, it forms a two-phase prewash system that tackles different types of dirt. The final high-pressure rinse completes the process without the need for mechanical contact. No NTA added* * May contain traces. Directions for use Automatic car washes: 4-20 ml/car; touchless 60-150 ml/car. Self-service tracks: foam wash 8-20 ml/car; active foam prewash 20-80 ml/car. Spray system: vehicles 1:50-1:200; trucks ≥ 1:25; rims 1:20; gnats 1:30. Foam lance: from 1:4 to 1:9. ATTENTION: not suitable for motorcycles. If used on dark, old and oxidised paint, it is recommended to cool the surface with water jets before applying the product. Pre-dilution The product can be pre-diluted. Storage method and water quality can affect the duration of the solution. Warnings When handling the product, observe the advice given in the MSDS and data sheets, the manufacturer’s warnings on the devices and materials involved and, if necessary, check for tolerability. Keep container closed and only use plugs with tube passages. The raw materials used may lead to changes in colour and turbidity, without this leading to a drop in performance and/or quality. In the case of high water temperature (> 40°C) and/or water hardness (> 4.5 mmol/L ≈ 25° dH), limescale formation can be prevented by adding “Ca Clean”. Warnings When handling the product, observe the advice given in the MSDS and data sheets, the manufacturer’s warnings on the devices and materials involved and, if necessary, check for tolerability. Keep container closed and only use plugs with tube passages. The raw materials used may lead to changes in colour and turbidity, without this leading to a drop in performance and/or quality. In the case of high water temperature (> 40°C) and/or water hardness (> 4.5 mmol/L ≈ 25° dH), limescale formation can be prevented by adding “Ca Clean”.